GQ Electronics Technical Support Forum
.


GQ Electronics Technical Support Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 GQ Electronics Forums
 3. GQ EMF EF Meter RF Spectrum Power Analyzer
 RF TABLE, RF BROWSER
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

FRITZ

Germany
1 Posts

Posted - 12/13/2020 :  07:18:08  Show Profile  Reply with Quote
I am new and many things seem strange to me and let me question whether my Newly acquired device GQ EMF 390 is functioning properly.
For example RF TABLE MODE always shows 5 very slightly differing MHZ Values in the range of 2400+ MHZ.
But these same values are shown all the time (24hrs) and at ALL PLACES (whether I am at home or in a far-away Shopping Mall for example).
How is it possible that ALWAYS these exact same 5 values are shown, no matter WHERE I am and what is the time of the day? And why does it always show exactly 5 values, not more and not less?
And why donít I see any of these MHZ Value in my RF BROWSER? Let alone the SOURCE of these RF Radiations, whether they originate from a CELL TOWER or the WIFI of my neighbors?
And I also donít see the High RF values in the RF TABLE reflected in any way in the
mW/sqm Parameter, which shows persistently extremely low values
With friendly greetings
FRITZ
Reply #1

EmfDev

1483 Posts

Posted - 12/14/2020 :  10:35:49  Show Profile  Reply with Quote
Hi FRITS, the RF TABLE MODE is only to display the highest frequency values from the spectrum 2.4-2.5GHz and 240MHz-1040MHz. Anything in between or outside those range cannot be seen.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GQ Electronics Technical Support Forum © Copyright since 2011 Go To Top Of Page
Generated in 0.17 sec. Snitz's Forums 2000