|T O P I C R E V I E W
||Posted - 12/13/2020 : 07:18:08
I am new and many things seem strange to me and let me question whether my Newly acquired device GQ EMF 390 is functioning properly.
For example RF TABLE MODE always shows 5 very slightly differing MHZ Values in the range of 2400+ MHZ.
But these same values are shown all the time (24hrs) and at ALL PLACES (whether I am at home or in a far-away Shopping Mall for example).
How is it possible that ALWAYS these exact same 5 values are shown, no matter WHERE I am and what is the time of the day? And why does it always show exactly 5 values, not more and not less?
And why donít I see any of these MHZ Value in my RF BROWSER? Let alone the SOURCE of these RF Radiations, whether they originate from a CELL TOWER or the WIFI of my neighbors?
And I also donít see the High RF values in the RF TABLE reflected in any way in the
mW/sqm Parameter, which shows persistently extremely low values
With friendly greetings
|1 L A T E S T R E P L I E S (Newest First)
||Posted - 12/14/2020 : 10:35:49
Hi FRITS, the RF TABLE MODE is only to display the highest frequency values from the spectrum 2.4-2.5GHz and 240MHz-1040MHz. Anything in between or outside those range cannot be seen.