GQ Electronics Technical Support Forum Active Users: / Visits Today:
Highest Active Users:
GQ Electronics Technical Support Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 GQ Electronics Forums
 3. GQ EMF EF Meter RF Spectrum Power Analyzer
 Strange pulse when WiFi turned on?
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

dj2327

3 Posts

Posted - 10/07/2020 :  09:56:00  Show Profile  Reply with Quote
Hi again,

When I switch WiFi on, on my phone, after about 3-4 seconds I see a pulse of anything between 80 and 130 mW/m2, ... and then it settles down to spikes of around 5 or up to 20 or 30.

Sensor is about 2.5 inches from the phone.

It seems strange, that this initial pulse/spike is significantly higher (e.g., 130 is 6.5x more than 20, or 26x more than 5).

Is this a glitch/error in the sensor, e.g., is the RF sensor more sensitive if it hasn't detected anything for a while?

Or is my phone actually emitting a higher powered pulse when WiFi is switched on?

Was just curious as it seems kind of interesting and strange for the phone to do that...

Also, it doesn't seem to do it every time either. So it's hard for me to replicate. But several times now I have seen it spike at around 130, which seems extra-ordinarily high, does it not?

Thanks :)
Reply #1

EmfDev

2250 Posts

Posted - 10/07/2020 :  10:16:21  Show Profile  Reply with Quote
It might be because initializing connections use more power.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GQ Electronics Technical Support Forum © Copyright since 2011 Go To Top Of Page
Generated in 0.06 sec. Snitz's Forums 2000