| Author |
 Topic  |
|
|
Geo-Johnny
Austria
161 Posts |
 Posted - 10/29/2019 : 05:12:52
|
| I have an idea, but I do not know if it's possible. ..... Could one program the firmware so that with a short pressure on a key (example Powerswitch) or pressing two buttons together at the same time, the display is frozen? A datahold function. If you press the button briefly again, the normal measuring mode will continue. This feature would be very helpful if the display is being photographed for sharing. |
Geiger Counters: GMC320+V5 & GMC500+
Geiger Tubes: M4011; SI-3BG; SBT-9; LND712; SBM-20 |
Edited by - Geo-Johnny on 10/29/2019 07:21:12
|
|
| Reply #1
EmfDev
2321 Posts |
Posted - 10/29/2019 : 08:51:45
|
| There is a screenshot feature in the EMF-390 by holding the 2 middle buttons. It will record a screen photo and will be saved and viewed in the unit. Can also be downloaded with the software. This is a good suggestion and might be added to the GMC-500/600 series. |
 |
|
| Reply #2
Geo-Johnny
Austria
161 Posts |
Posted - 10/29/2019 : 10:01:18
|
YYYeeeaaahhh, i hope so.  |
Geiger Counters: GMC320+V5 & GMC500+
Geiger Tubes: M4011; SI-3BG; SBT-9; LND712; SBM-20 |
|
|
| Reply #3
Stargazer 40
USA
431 Posts |
Posted - 10/29/2019 : 11:58:49
|
| Would this save only a single screen shot or three or five? What memory would hold this? Any chance of adding a Micro SDHC card slot to record data on the device and place in file that could be uploaded to analysis software as well as hold screen images? |
Stargazer 40 |
|
|
| Reply #4
EmfDev
2321 Posts |
Posted - 10/30/2019 : 10:30:31
|
| For the EMF-390 it had 4 but can be more. It is saved in the memory chip. For now there is no plan on adding Micro SDHC. |
|
|
| Reply #5
Geo-Johnny
Austria
161 Posts |
Posted - 10/30/2019 : 10:36:44
|
quote:
Originally posted by EmfDev
For the EMF-390 it had 4 but can be more. It is saved in the memory chip.
That's enough. Please make the firmware and PC software possible for the GMC 500/600 models !!! |
Geiger Counters: GMC320+V5 & GMC500+
Geiger Tubes: M4011; SI-3BG; SBT-9; LND712; SBM-20 |
|
|
| |
Topic |
|
Add a Datahold function on GMC's possible?
