| T O P I C R E V I E W |
| Geo-Johnny |
Posted - 10/29/2019 : 05:12:52
I have an idea, but I do not know if it's possible. ..... Could one program the firmware so that with a short pressure on a key (example Powerswitch) or pressing two buttons together at the same time, the display is frozen? A datahold function. If you press the button briefly again, the normal measuring mode will continue. This feature would be very helpful if the display is being photographed for sharing. |
| 5 L A T E S T R E P L I E S (Newest First) |
| Geo-Johnny |
Posted - 10/30/2019 : 10:36:44
quote:
Originally posted by EmfDev
For the EMF-390 it had 4 but can be more. It is saved in the memory chip.
That's enough. Please make the firmware and PC software possible for the GMC 500/600 models !!! |
| EmfDev |
Posted - 10/30/2019 : 10:30:31
For the EMF-390 it had 4 but can be more. It is saved in the memory chip. For now there is no plan on adding Micro SDHC. |
| Stargazer 40 |
Posted - 10/29/2019 : 11:58:49
Would this save only a single screen shot or three or five? What memory would hold this? Any chance of adding a Micro SDHC card slot to record data on the device and place in file that could be uploaded to analysis software as well as hold screen images? |
| Geo-Johnny |
Posted - 10/29/2019 : 10:01:18
YYYeeeaaahhh, i hope so.  |
| EmfDev |
Posted - 10/29/2019 : 08:51:45
There is a screenshot feature in the EMF-390 by holding the 2 middle buttons. It will record a screen photo and will be saved and viewed in the unit. Can also be downloaded with the software. This is a good suggestion and might be added to the GMC-500/600 series. |
