GQ Electronics Technical Support Forum Active Users: / Visits Today:
Highest Active Users:
GQ Electronics Technical Support Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 GQ Electronics Forums
 2.GQ Geiger Muller Counter
 GMC-600+ Reading too high for sample?
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Rightfrog

USA
2 Posts

Posted - 03/15/2021 :  12:30:12  Show Profile  Reply with Quote
I have a new GMC-600+ and recently ran it against a sample of uranium ore certified at 1109 CPM using a GCA-07W. The CPM number is "combined alpha, beta, and gamma radiation emissions". The measurement was taken at zero distance from the sample and at the highest reading spot.

Just setting my unit over the container with the lid off is giving me a CPM of over 3000 and that's a consistent number after letting it measure over 3+ minutes. If I move the sample directly in front of the tube, it reads over 16000.

I've tried setting fast estimate to 60 seconds (defaulted to dynamic) but it still reads > 3000.

The unit seems to read background levels OK. On its own, it's usually 30-40CPM.

What am I missing?
Reply #1

EmfDev

2132 Posts

Posted - 03/15/2021 :  17:55:00  Show Profile  Reply with Quote
The GCA-07W has a different tube and seems like it is less sensitive than the GMC-600+. You should compare the uSv/h or radiation rate. Those should be similar.
Go to Top of Page
Reply #2

Rightfrog

USA
2 Posts

Posted - 03/16/2021 :  02:46:02  Show Profile  Reply with Quote
Much appreciated!
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GQ Electronics Technical Support Forum © Copyright since 2011 Go To Top Of Page
Generated in 0.07 sec. Snitz's Forums 2000