GQ Electronics Technical Support Forum Active Users: / Visits Today:
Highest Active Users:
GQ Electronics Technical Support Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 GQ Electronics Forums
 3. GQ EMF EF Meter RF Spectrum Power Analyzer
 EMF-390 No Table Mode (RF) in demo (simulation)
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Green Peace

Ukraine
6 Posts

Posted - 11/18/2020 :  15:33:42  Show Profile  Reply with Quote
Hello :).

Please check the demo (simulation) table RF mode does not want to be displayed .
uploaded/Green Peace/20201118052328No Table Mode (RF).GIF

Can I decompose the RF signal into X, Y, Z axes ?

Please tell me the sequence of keystrokes to see the RF spectrum and RF browser for individual frequency
bands 4: 240 MHz – 1040 MHz and frequency
bands 3: 76 MHz – 108 MHz

0.0006 - 0.0128 mcW/cm2 = 0.006 - 0.128 mW/m2 = 48 mV/m - 220 mV/m :

Fatigue, depressive tendency, sleeping disorders, concentration difficulties, cardio- vascular problems reported with exposure to GSM 900/1800 MHz cell phone signal at base station level exposures.

Oberfeld, 2004
www.bioinitiative.org/wp-content/uploads/pdfs/BioInitiativeReport-RF-Color-Charts.pdf

Edited by - Green Peace on 11/18/2020 16:29:48
Reply #1

EmfDev

2143 Posts

Posted - 11/19/2020 :  10:04:18  Show Profile  Reply with Quote
Hi Green Peace, the RF does not have XYZ sensor. You must hold the down button to check other bands in RF spectrum.
Go to Top of Page
Reply #2

Green Peace

Ukraine
6 Posts

Posted - 11/21/2020 :  06:45:33  Show Profile  Reply with Quote
quote:
Originally posted by EmfDev

.... You must hold the down button to check other bands in RF spectrum.

EmfDev thanks :)
Thank You for your response!

My action is this: I start the demo(simulation) by pressing the S4 button, then press the S1 button, select the RF Spectrum see the band 5: 2.4 GHz-2.5 GHz, press and hold the S3 key (at the bottom): nothing happens, the lane doesn't change :(
In the case of Table Mode, the same thing ...

You can download the demo(simulation) from here https://www.gqelectronicsllc.com/download/EMF-390_Demo.exe and watch it for yourself.

Maybe there is a video review with a real physical device EMF-390 with band switching ?

0.0006 - 0.0128 mcW/cm2 = 0.006 - 0.128 mW/m2 = 48 mV/m - 220 mV/m :

Fatigue, depressive tendency, sleeping disorders, concentration difficulties, cardio- vascular problems reported with exposure to GSM 900/1800 MHz cell phone signal at base station level exposures.

Oberfeld, 2004
www.bioinitiative.org/wp-content/uploads/pdfs/BioInitiativeReport-RF-Color-Charts.pdf

Edited by - Green Peace on 11/21/2020 06:54:58
Go to Top of Page
Reply #3

EmfDev

2143 Posts

Posted - 11/23/2020 :  11:30:08  Show Profile  Reply with Quote
https://www.youtube.com/watch?v=AszUZQf6-Y4&ab_channel=JimMorrison

Here you can see an older version of EMF380. It is the same 240-1060 MHz and 2.4-2.5GHz but the bottom bands are different.
Go to Top of Page
Reply #4

Green Peace

Ukraine
6 Posts

Posted - 11/25/2020 :  08:07:00  Show Profile  Reply with Quote
EmfDev, I thank you :) for the tutorial video.

Here's another video from the same channel https://youtu.be/P68ruve8qw0 how to learn how to work with EMF-380 / 390 .

I hope that in the future the demo (simulation) will record real RF Spectrum near FM / GSM towers.

So your devices can be purchased by government organizations in other countries, as they are cheaper and more informative.

0.0006 - 0.0128 mcW/cm2 = 0.006 - 0.128 mW/m2 = 48 mV/m - 220 mV/m :

Fatigue, depressive tendency, sleeping disorders, concentration difficulties, cardio- vascular problems reported with exposure to GSM 900/1800 MHz cell phone signal at base station level exposures.

Oberfeld, 2004
www.bioinitiative.org/wp-content/uploads/pdfs/BioInitiativeReport-RF-Color-Charts.pdf
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GQ Electronics Technical Support Forum © Copyright since 2011 Go To Top Of Page
Generated in 0.06 sec. Snitz's Forums 2000