GQ Electronics Technical Support Forum Active Users: / Visits Today:
Highest Active Users:
GQ Electronics Technical Support Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 GQ Electronics Forums
 3. GQ EMF EF Meter RF Spectrum Power Analyzer
 GQ EMF Pro software Mac Install
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

bigtoe

4 Posts

Posted - 10/16/2019 :  02:18:28  Show Profile  Reply with Quote
HI all,

Sorry for the long post in advance.

I received my GQ EMP 390 detector today. Very excited and curious about what I can and cannot do.

I am trying to get data from the detector into my MacBook laptop. I have read the documentation and attempted to make the connection. But I am unable to actually transfer data.

There are 2 parts to the installation. The device driver for the serial port connection and the software itself. I think my problem is with the driver. I am actually able to see the Pro software. See my screen shots below. When I actually connect my detector, I can see the device listed. The “connect” button becomes active (turns blue/white). However, after about 2 or 3 seconds the “connect” button becomes inactive (turns black/gray). (so hopeful and then my hopes dashed upon the rocks of despair…).


What I think the problem is -> The device driver appears to load successfully, ie, no errors. However the documentation mentions a “vendor-specific device” item that should be visible from the USB device tree via hardware settings. I see a serial device listed but it is called something else. My assumption is that MacOS is installing some type of default serial driver.

Anybody have success with data transfer with the MacOS?

Any suggestions or advice are greatly appreciated. THanks!

Image Insert:

62645 bytes

Image Insert:

113829 bytes

Image Insert:

84123 bytes
Reply #1

EmfDev

2132 Posts

Posted - 10/16/2019 :  09:28:18  Show Profile  Reply with Quote
Hi bigtoe, so it is able to connect but after few seconds it disconnects? What happens if you click the connect button?
Go to Top of Page
Reply #2

bigtoe

4 Posts

Posted - 10/17/2019 :  02:49:25  Show Profile  Reply with Quote
Nothing happens when I click the connect button. The Connect button after about 2 seconds turns back to gray.

I can click on the other buttons(1,2,3,4 and ASCII/HEX). They change based on what I click. Also, everything responds slowly. 1 or 2 second delay when clicking. Not really an issue, just something I noticed.
Go to Top of Page
Reply #3

EmfDev

2132 Posts

Posted - 10/17/2019 :  09:02:55  Show Profile  Reply with Quote
We have tested it in our older macOS and seems to have no problem or delay. Can I ask what version of MacOS you are using? Hmm have you also entered the commands to remove old serial drivers?
Go to Top of Page
Reply #4

bigtoe

4 Posts

Posted - 10/17/2019 :  20:36:32  Show Profile  Reply with Quote
MacOS Mojave 10.14.6

Yes, I did run the commands to remove the old serial drivers. Strange about this. If the Meter is plugged into my laptop, the serial driver is present. See the screen shot above under hardware/USB. Once I disconnect the meter from my laptop, the serial driver is not listed. My assumption is that The Mac OS is using a default driver.

I think the driver you guys supply is not getting installed correctly even though I do not see any error messages. The PDF documentation for the serial driver installation shows a screen shot and mentions the "Vendor-Specific Device". I do not see this after I try to install the serial driver. :/
Go to Top of Page
Reply #5

EmfDev

2132 Posts

Posted - 10/18/2019 :  10:31:30  Show Profile  Reply with Quote
There was also no "Vendor-Specific Device" when we did it.

Here is a link on installing latest one maybe this one will help.
https://learn.sparkfun.com/tutorials/how-to-install-ch340-drivers/all

Here are also the older packages for the driver
https://sparks.gogo.co.nz/ch340.html

Please let us know if any of these work on your computer.
Go to Top of Page
Reply #6

bigtoe

4 Posts

Posted - 10/19/2019 :  01:07:55  Show Profile  Reply with Quote
cool thanks. I will check it out and let you know.
Go to Top of Page
Reply #7

M3

Netherlands
17 Posts

Posted - 11/16/2019 :  07:49:38  Show Profile  Reply with Quote
I have exactly the same problem. I am on El Capitan.
My whole sytem got frozen after installing the usb driver.
Meanwhile, did you check it out bigtoe?

M3
Go to Top of Page
Reply #8

EmfDev

2132 Posts

Posted - 11/18/2019 :  10:44:55  Show Profile  Reply with Quote
Hi M3, did you follow the directions on the readme file or in the link?
Go to Top of Page
Reply #9

M3

Netherlands
17 Posts

Posted - 04/23/2020 :  05:42:46  Show Profile  Reply with Quote
[Hi M3, did you follow the directions on the readme file or in the link?]

Yes I did!

M3
Go to Top of Page
Reply #10

EmfDev

2132 Posts

Posted - 04/23/2020 :  08:52:44  Show Profile  Reply with Quote
Hi M3 we dont know why this drive does not work on other Macs. We are still investigating this.
Go to Top of Page
Reply #11

M3

Netherlands
17 Posts

Posted - 04/27/2020 :  02:32:04  Show Profile  Reply with Quote
Ok, thanks. I'm looking forward to having my system working with the EMF 390.

M3
Go to Top of Page
Reply #12

EmfDev

2132 Posts

Posted - 04/27/2020 :  13:34:37  Show Profile  Reply with Quote
It would take a while since we do not have the same computer you are using.
Go to Top of Page
Reply #13

Joff

South Africa
9 Posts

Posted - 05/13/2021 :  10:37:11  Show Profile  Reply with Quote
quote:
Originally posted by EmfDev

Hi M3, did you follow the directions on the readme file or in the link?



Hi, I am trying to get the EMF PRO software to work on my Mac. I am getting the same problem where it doesn't seem to connect.
I tried on two Macs, the first Mojave 10.14.6 and the second on Big Sur. Big Sur says it's not compatible though.

I did try remove the serial driver and re-install it.

Any other advice as I really want to use this software?
Go to Top of Page
Reply #14

Joff

South Africa
9 Posts

Posted - 05/13/2021 :  10:39:38  Show Profile  Reply with Quote
Did you ever have any success Bigtoe?

quote:
Originally posted by bigtoe

HI all,

Sorry for the long post in advance.

I received my GQ EMP 390 detector today. Very excited and curious about what I can and cannot do.

I am trying to get data from the detector into my MacBook laptop. I have read the documentation and attempted to make the connection. But I am unable to actually transfer data.

There are 2 parts to the installation. The device driver for the serial port connection and the software itself. I think my problem is with the driver. I am actually able to see the Pro software. See my screen shots below. When I actually connect my detector, I can see the device listed. The “connect” button becomes active (turns blue/white). However, after about 2 or 3 seconds the “connect” button becomes inactive (turns black/gray). (so hopeful and then my hopes dashed upon the rocks of despair…).


What I think the problem is -> The device driver appears to load successfully, ie, no errors. However the documentation mentions a “vendor-specific device” item that should be visible from the USB device tree via hardware settings. I see a serial device listed but it is called something else. My assumption is that MacOS is installing some type of default serial driver.

Anybody have success with data transfer with the MacOS?

Any suggestions or advice are greatly appreciated. THanks!

Image Insert:

62645 bytes

Image Insert:

113829 bytes

Image Insert:

84123 bytes

Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GQ Electronics Technical Support Forum © Copyright since 2011 Go To Top Of Page
Generated in 0.08 sec. Snitz's Forums 2000