GQ Electronics Technical Support Forum Active Users: / Visits Today:
Highest Active Users:
GQ Electronics Technical Support Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 GQ Electronics Forums
 2.GQ Geiger Muller Counter
 Voltage adjustment GMC-300+ V7 board
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

vikisonline

Canada
3 Posts

Posted - 06/27/2019 :  17:25:56  Show Profile  Reply with Quote
I have a GMC-300+ and it says V7 on the board inside.

I bought this with the hopes of using other tubes in it,
but it seems like there is no pot to adjust the voltage any more?

Is there a way to still change the voltage by soldering resistors maybe?
I was hoping to put an SBT-9 in it or maybe some LNDs (though LNDs require much much higher voltages)
Reply #1

Geo-Johnny

Austria
161 Posts

Posted - 06/28/2019 :  05:37:58  Show Profile  Reply with Quote
quote:
Originally posted by vikisonline

I have a GMC-300+ and it says V7 on the board inside.

I bought this with the hopes of using other tubes in it,
but it seems like there is no pot to adjust the voltage any more?

Is there a way to still change the voltage by soldering resistors maybe?
I was hoping to put an SBT-9 in it ...



Exactly this problem I have with a GMC 320 + V5. On the board is also V7 and no potentiometer for the high voltage. It would also be interesting for me how you could realize the conversion to a SBT-9 counter tube? Pictures would be very nice too?

Geiger Counters: GMC320+V5 & GMC500+
Geiger Tubes: M4011; SI-3BG; SBT-9; LND712; SBM-20
Go to Top of Page
Reply #2

vikisonline

Canada
3 Posts

Posted - 06/28/2019 :  07:18:25  Show Profile  Reply with Quote
I chose the sbt-9 because its voltage requirement is very close to the original m4011. I'll let you know if it works with no modification, I should have it in a week or so.

But ideally I should be able to adjust the voltage :(. All the older models had this capability, not sure why it was removed.

Without that sbt-9 might work, same for the 20 tube. but the better lnds will never work at these low voltage.
Go to Top of Page
Reply #3

Geo-Johnny

Austria
161 Posts

Posted - 06/28/2019 :  08:23:22  Show Profile  Reply with Quote
Thank you. We will look forward. Maybe there is another user who has already realized the conversion from the M4011 to the SBT-9 tube.

Geiger Counters: GMC320+V5 & GMC500+
Geiger Tubes: M4011; SI-3BG; SBT-9; LND712; SBM-20
Go to Top of Page
Reply #4

EmfDev

2132 Posts

Posted - 06/28/2019 :  12:01:05  Show Profile  Reply with Quote
On the new hardware unfortunately there's no way to adjust the voltage anymore. Our engineer said that this new hardware is more reliable than the old.
Go to Top of Page
Reply #5

Geo-Johnny

Austria
161 Posts

Posted - 06/28/2019 :  12:15:18  Show Profile  Reply with Quote
I am confident that we will find a simple hardware solution to match another counter tube such as the SBT-9. Good things take time.

Geiger Counters: GMC320+V5 & GMC500+
Geiger Tubes: M4011; SI-3BG; SBT-9; LND712; SBM-20
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GQ Electronics Technical Support Forum © Copyright since 2011 Go To Top Of Page
Generated in 0.06 sec. Snitz's Forums 2000