| Author |
 Topic  |
|
|
sebastian
Hong Kong
2 Posts |
 Posted - 02/09/2024 : 15:42:02
|
| The only trouble I have with my 500+ is that the date/time of the unit shifts significantly after, say, a week or so. Will be very helpful if it can synchronize its clock with a network time server. It¡¦s not connected to PC, have to set the clock manual from time to time, and the log timestamp interval will be shortened or lengthened at the re-synchronization. |
|
| Reply #1
EmfDev
2157 Posts |
Posted - 02/12/2024 : 10:49:29
|
| @sebastian, we are working on making the clock stable and your suggestion is actually really good. I will pass it to our team. |
 |
|
| Reply #2
Bobakman
USA
91 Posts |
Posted - 02/14/2024 : 20:57:06
|
Same with my 600+ the clock is horrible at keeping correct time. I hope a fix such as you suggested is soon to be released in the next firmware update if it can.
Otherwise I love GeigerLog since it has a feature to sync the GMC Geiger counter clock to the PC time while using the program, a must when working with the data, which GeigerLog excels at hands down.
Bob |
“If you want to find the secrets of the universe, think in terms of energy, frequency and vibration.”
Nikola Tesla |
Edited by - Bobakman on 02/14/2024 21:01:25 |
|
|
| Reply #3
the_mike
Switzerland
53 Posts |
Posted - 04/15/2024 : 08:17:07
|
| Since the clock-issue seems to be a problem for all GMC, i'd suggest to simply add a little RealTime-Clock to the board. would be a lesser drain on the battery than a wlan-connection and an NTP-sync which, due to the current lack of an RTC will go out of sync in no time (pun intented)... |
|
|
| Reply #4
EmfDev
2157 Posts |
Posted - 04/15/2024 : 09:51:24
|
| Out team is working on making the clock better. |
|
|
| |
Topic |
|
Feature suggestion: sync time with time server
