GQ Electronics Technical Support Forum
.


GQ Electronics Technical Support Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 GQ Electronics Forums
 3. GQ EMF EF Meter RF Spectrum Power Analyzer
 Frequency Range for Power Density
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

frank.mathieu@GQ

Germany
22 Posts

Posted - 09/29/2021 :  05:40:09  Show Profile  Reply with Quote
Hello, Thanks for your answers.

What frequency range is used for the calculation of Power Density in Watts/m or pico Watts/cm, etc.

Thank you.
Reply #1

EmfDev

1483 Posts

Posted - 09/29/2021 :  09:55:38  Show Profile  Reply with Quote
Hi Frank, for RF the frequency range is 10MHz - 10GHz.
Go to Top of Page
Reply #2

frank.mathieu@GQ

Germany
22 Posts

Posted - 09/30/2021 :  03:30:15  Show Profile  Reply with Quote
Excellent, Thank you.
Go to Top of Page
Reply #3

frank.mathieu@GQ

Germany
22 Posts

Posted - 09/30/2021 :  03:40:59  Show Profile  Reply with Quote
One last thing.
People I talk to often request flux density in V/m.


Would it be correct to calculate V/m by using formula
square root of (measured Watts per m * 377)

In other words, is 1mW/m
= square root of (1 / 1000 * 377)
= 0,61400325732035 V/m

in the frequency range of 10MHz - 10GHz?


Thank you again.
Go to Top of Page
Reply #4

EmfDev

1483 Posts

Posted - 09/30/2021 :  11:29:28  Show Profile  Reply with Quote
That is correct.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GQ Electronics Technical Support Forum © Copyright since 2011 Go To Top Of Page
Generated in 0.18 sec. Snitz's Forums 2000