GQ Electronics Technical Support Forum
.


GQ Electronics Technical Support Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 GQ Electronics Forums
 3. GQ EMF EF Meter RF Spectrum Power Analyzer
 Measuring magnetic field of the electromagnet
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

raimondsgr

1 Posts

Posted - 12/20/2020 :  10:47:06  Show Profile  Reply with Quote
Dear all,

Is it possible to use GQ EMF 390 device to measure magnetic field intensity of a wire coil, which is connected to direct current? This is essentially a weak electromagnet, and the strength of magnetic field should be within limits of 80 to 400 Gauss. I need to test it, because it is part of the medical equipment provided to my mother. I hope that somebody can provide a prompt answer.

Best regards -
raimondsgr

Edited by - raimondsgr on 12/21/2020 00:36:21
Reply #1

EmfDev

1454 Posts

Posted - 12/21/2020 :  10:16:55  Show Profile  Reply with Quote
If it is using DC, it will not read the field (only on power up). Once the current stabilizes, it wont pick up the field anymore.
Go to Top of Page
Reply #2

Bill D.

USA
44 Posts

Posted - 12/27/2020 :  13:52:11  Show Profile  Reply with Quote
If you move the unit across the magnet it will register. But the reading is not measuring the actual strength of the field, but the ability of the field to induce a current in the detector. Thus, the faster you move the unit across the magnet, the higher the reading. When the magnet is off, the reading should be zero unless the equipment is producing some other field.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GQ Electronics Technical Support Forum © Copyright since 2011 Go To Top Of Page
Generated in 0.14 sec. Snitz's Forums 2000