|
TominoP
Czech Republic
2 Posts |
 Posted - 01/10/2020 : 06:41:21
|
Hi there,
I have a weird experience during testing my new emf-390 device. My main idea was to verify how strong is RF signal from my Baofeng UV-5R walkie talkie if the output value 5W provided by the producer is true or false.
So let's get started:
Switch on my emf-390 go to allInOne mode and select RF+ measurement
Then switch on my Baofeng uv-5r a frequency of 412Mhz start to broadcast.
Then something weird happened to my device emf-390. EMF-390 showed in their display that battery is fully charged (but I didn't connect it into charge - no cable connect)
When the test was repeated several times device measured 50000mW/m2 it's a crazy high value. After every test, the device (emf-390) had weird behavior (display boosts the backlight - or switched off for a while - or shows battery icon)
So my question is could this strong signal from baofeng walkie talkie interfere with my emf-390 or could cause some damage in their electronics after this testing?
Maybe it is the correct behavior when the emf-390 was exposure to a strong signal, I don't really know.
Give me please answer or if you have guy's similar experience please write a comment below. We can talk about it.
See ya |
Edited by - TominoP on 01/10/2020 06:44:34
|
|
Strong walkie talkie signal to harm emf-390?
