GQ Electronics Technical Support Forum Active Users: / Visits Today:
Highest Active Users:
GQ Electronics Technical Support Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 GQ Electronics Forums
 2.GQ Geiger Muller Counter
 GQ GMCounter PRO		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

yapl

Russia
3 Posts
Posted - 03/29/2012 :  23:48:18  Show Profile  Reply with Quote
I've got GMC-080 and start using it with GMCounter Pro on PC and Geiger Bot on iPhone.
And what I've got is complete different results.
GMCounter shows 0.7 uSv/h and Geiger Bot 0.09 uSv/h (average results)
I think what Geiger Bot is telling is more close to the truth 'cause 0.7 is a very high level of radiation in my area.
Are there any setting to do with GMCounter Pro?
Reply #1

ZLM

1261 Posts
Posted - 03/30/2012 :  00:26:54  Show Profile  Reply with Quote
Make sure followings:

1. the GMCounter software setting is are correct. each click sound should be one count in software.
2. check the GMCounter software calibration data.
Go to Top of Page
Reply #2

yapl

Russia
3 Posts
Posted - 03/30/2012 :  03:31:27  Show Profile  Reply with Quote
Thank you for your reply!

I've connected detector to computer with the cable and disabled laptop internal mic. Every click is counted.
iPhone is also counting every click during all my tests.

All the setting of the software are default. Is it necessary to alter the calibration data?
Go to Top of Page
Reply #3

ZLM

1261 Posts
Posted - 03/30/2012 :  14:22:44  Show Profile  Reply with Quote
If you think the reading is far away from the actual reading, then you can change the calibration data.
Go to Top of Page
Reply #4

yapl

Russia
3 Posts
Posted - 04/01/2012 :  02:51:47  Show Profile  Reply with Quote
I've made calibration, but how can I make the program remember these settings? After program restarts it returns to default values. I use Win7.
Any way to fix it?
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GQ Electronics Technical Support Forum © Copyright since 2011 Go To Top Of Page
Generated in 0.08 sec. Snitz's Forums 2000