GQ Electronics Technical Support Forum Active Users: / Visits Today:
Highest Active Users:
GQ Electronics Technical Support Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 GQ Electronics Forums
 2.GQ Geiger Muller Counter
 500+ Tube 2 still counts in Tube 1 mode?		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

UnstableIsotope

USA
67 Posts
Posted - 12/05/2023 :  20:13:31  Show Profile  Reply with Quote
I turned on the individual CPM1 / CPM2 counts in the menu.

In dual tube mode, when close to my Uranium ore I got about 1400 counts on CPM1 and 20 on CPM2. The two were summed for the final CPM value.

I then selected Tube 1 only mode and power-cycled the unit as required.

It still showed similar counts for CPM1 and CPM2 but only used CPM1 as the final CPM value.

I assumed it would disable or power down Tube 2 in this mode and logically remove CPM2 from the display.

Am I expecting this incorrectly?
Reply #1

UnstableIsotope

USA
67 Posts
Posted - 12/06/2023 :  09:29:04  Show Profile  Reply with Quote
I tested Tube 2 only mode and that acts like I would expect. Not only does CPM1 show no counts, but when I check the tube voltage for tube 1 it shows 12V (41.33%) indicating that indeed, Tube 1 is powered down. However, the Tube 2 voltage option only shows percentage not voltage like tube 1. Another bug?
Edited by - UnstableIsotope on 12/06/2023 09:30:54
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GQ Electronics Technical Support Forum © Copyright since 2011 Go To Top Of Page
Generated in 0.06 sec. Snitz's Forums 2000