GQ Electronics Technical Support Forum Active Users: / Visits Today:
Highest Active Users:
GQ Electronics Technical Support Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 GQ Electronics Forums
 4. GQ Hot Air Soldering Rework Station
 How to remove and then solder a SMD chip on PCB?		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

ZLM

1269 Posts
Posted - 02/13/2012 :  17:12:07  Show Profile  Reply with Quote
The steps to remove and then solder back a SMD chip. Following tools are used:

1. a 2-in1 rework station (TOOL-021)
http://www.gqelectronicsllc.com/comersus/store/comersus_viewItem.asp?idProduct=4393

2. SMD rework essential pack (TOOL-031)
http://www.gqelectronicsllc.com/comersus/store/comersus_viewItem.asp?idProduct=4446"


Remove Steps:



1. Prepar the SMD rework station


Adjust temperature to 350 degree C on both hot air and iron.


2. Use hot air to heat the chip and remove the chip using the tweezer.





3. Chip removed






[b]4. Plcae the chip in adapter for read/write on programmer
Reply #1

rddube

Canada
18 Posts
Posted - 07/31/2015 :  11:23:41  Show Profile  Reply with Quote
I have a question: Why turn on the iron if it is not used?

Thank you!

Raymond
Raymond
Go to Top of Page
Reply #2

ZLM

1269 Posts
Posted - 08/01/2015 :  17:05:56  Show Profile  Reply with Quote
The iron is going to be used when soldering back the chip.
Go to Top of Page
Reply #3

radciffkaty1

12 Posts
Posted - 04/04/2018 :  04:59:51  Show Profile  Reply with Quote
Hello @ZLM
While using hot air to desolder the SMD components, What temperature is reasonably safe?
Go to Top of Page
Reply #4

Betty Hunt

India
15 Posts
Posted - 05/29/2019 :  04:33:21  Show Profile  Reply with Quote
You can go upto 380°C-400°C.
Go to Top of Page
Reply #5

Betty Hunt

India
15 Posts
Posted - 06/25/2019 :  05:18:39  Show Profile  Reply with Quote
You are using the right way ElsaCline.
Go to Top of Page
Reply #6

jbdavi211

USA
21 Posts
Posted - 12/15/2019 :  18:17:46  Show Profile  Reply with Quote
Hello, if you want some in depth info and video of how to do all the things asked in this forum , rework, solder, R&R chips

look at a guy in NY that repairs MAC boards as he has all sorts of FREE videos on how to R&R chips and how to protect other chips on the board next to what your doing.

No I don't know this guy but watch lots of his videos as he really explains how to do chip and board repair RIGHT

he has lots of youtube videos for all that sort of stuff, just search on youtube

>>> Louis Rossmann <<<
Edited by - jbdavi211 on 12/15/2019 18:22:01
Go to Top of Page
Reply #7

Betty Hunt

India
15 Posts
Posted - 07/14/2020 :  03:52:21  Show Profile  Reply with Quote
That will be great! Thanks @jbdavi211
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GQ Electronics Technical Support Forum © Copyright since 2011 Go To Top Of Page
Generated in 0.07 sec. Snitz's Forums 2000