| Author |
 Topic  |
|
|
UnstableIsotope
USA
67 Posts |
 Posted - 12/05/2023 : 16:49:56
|
I find LCD's to be easier to read, especially in bright sunlight, when in reverse mode so I set that option when I found it on the 500+. However, I shut the unit down and when I restarted it, the reversed display option was back to normal. I tried this twice with the same effect.
I am running firmware 2.50 on my GMC-500+ that I just received today.
Looks like a minor bug. |
|
| Reply #1
EmfDev
2313 Posts |
Posted - 12/05/2023 : 17:07:37
|
| Thank you for noticing, I will send it to our devs. |
 |
|
| Reply #2
UnstableIsotope
USA
67 Posts |
Posted - 12/05/2023 : 17:36:49
|
A minor thing, but it should work as expected.
Thanks! |
|
|
| Reply #3
UnstableIsotope
USA
67 Posts |
Posted - 12/06/2023 : 19:27:25
|
| This is still the case in firmware 2.52 |
|
|
| Reply #4
EmfDev
2313 Posts |
Posted - 12/07/2023 : 14:51:08
|
| Might be fixed on the next firmware update. |
|
|
| Reply #5
UnstableIsotope
USA
67 Posts |
Posted - 12/07/2023 : 15:12:18
|
| Cool. Thanks! |
|
|
| Reply #6
Tony
Italy
4 Posts |
Posted - 03/03/2025 : 18:11:59
|
| Hi, I have the same problem, how do I invert the color, after a while it goes back to normal, or if I turn it off it inverts itself to normal |
ok |
|
|
| Reply #7
GTS
USA
40 Posts |
Posted - 03/04/2025 : 12:20:10
|
| Same problem for 600+ w/2.52. I there a later version where this is fixed? |
|
|
| Reply #8
EmfDev
2313 Posts |
Posted - 03/07/2025 : 12:43:47
|
| latest version has not been changed. There is a routine LCD refresh every hour but looks like it does not set the reverse display to the current config. |
|
|
| |
Topic |
|
Reverse display option does not persist
