Author |
Topic ![Next Topic Next Topic](icon_go_right.gif) |
|
Bobakman
![](icon_star_orange.gif) ![](icon_star_orange.gif) ![](icon_star_orange.gif) ![](icon_star_orange.gif)
USA
97 Posts |
Posted - 05/06/2023 : 18:14:28
|
To: Admin's Can you perhaps make this a "Sticky" so all users can be aware if they are running the latest firmware? Perhaps you can also link the firmware revisions here as well so users can update their devices? Thanks, Bob |
“If you want to find the secrets of the universe, think in terms of energy, frequency and vibration.” Nikola Tesla |
Edited by - Bobakman on 05/06/2023 18:16:16
|
|
Reply #1
tedssled
![](icon_star_silver.gif) ![](icon_star_silver.gif)
14 Posts |
Posted - 05/07/2023 : 06:04:58
|
I concur. That would be MOST useful. As far as I can tell, there is no way to find out what the current version of firmware is for a given device other than the prevail upon EMFDev to check for us. A simple list with links would make life easier for us and EMFDev.
|
![Go to Top of Page Go to Top of Page](icon_go_up.gif) |
|
Reply #2
EmfDev
![](icon_star_green.gif) ![](icon_star_green.gif) ![](icon_star_green.gif) ![](icon_star_green.gif) ![](icon_star_green.gif)
2234 Posts |
Posted - 05/08/2023 : 10:24:18
|
The firmware revision is tied to the device's serial number and if wrong firmware update is downloaded, the device may brick. |
![Go to Top of Page Go to Top of Page](icon_go_up.gif) |
|
Reply #3
Jadeye
![](icon_star_bronze.gif) ![](icon_star_bronze.gif) ![](icon_star_bronze.gif)
34 Posts |
Posted - 05/08/2023 : 11:37:50
|
A sticky post with a list that contains the most recent version numbers and which then gets regularly updated when there's a new revision for any device, would still help a lot, even if the user needs to request the firmware file individually. :) |
![Go to Top of Page Go to Top of Page](icon_go_up.gif) |
|
Reply #4
Bobakman
![](icon_star_orange.gif) ![](icon_star_orange.gif) ![](icon_star_orange.gif) ![](icon_star_orange.gif)
USA
97 Posts |
Posted - 05/08/2023 : 16:58:51
|
quote: Originally posted by Jadeye
A sticky post with a list that contains the most recent version numbers and which then gets regularly updated when there's a new revision for any device, would still help a lot, even if the user needs to request the firmware file individually. :)
Agree! This way at least we will know when to submit a request for our firmware update. Bob |
“If you want to find the secrets of the universe, think in terms of energy, frequency and vibration.” Nikola Tesla |
Edited by - Bobakman on 05/08/2023 22:13:10 |
![Go to Top of Page Go to Top of Page](icon_go_up.gif) |
|
Reply #5
ihab17
![](icon_star_red.gif) ![](icon_star_red.gif) ![](icon_star_red.gif) ![](icon_star_red.gif) ![](icon_star_red.gif)
Italy
218 Posts |
Posted - 05/09/2023 : 00:20:41
|
quote: Originally posted by Bobakman
quote: Originally posted by Jadeye
A sticky post with a list that contains the most recent version numbers and which then gets regularly updated when there's a new revision for any device, would still help a lot, even if the user needs to request the firmware file individually. :)
Agree! This way at least we will know when to submit a request for our firmware update. Bob
Fully agree with your request. Please GQ, at least add a sticky note for the latest firmware, and it is up to us to request the FW updates based on our current Firmware |
![Go to Top of Page Go to Top of Page](icon_go_up.gif) |
|
Reply #6
Bobakman
![](icon_star_orange.gif) ![](icon_star_orange.gif) ![](icon_star_orange.gif) ![](icon_star_orange.gif)
USA
97 Posts |
Posted - 05/09/2023 : 06:21:05
|
I was sent an E-mail today from GQ with the latest firmware update for my 600+ revision 2.45 which I updated today. Previous on my machine was 2.42. I also requested a Firmware change log if available from at least 2.42 to the current revision, this too should be included in the "sticky". Bob |
“If you want to find the secrets of the universe, think in terms of energy, frequency and vibration.” Nikola Tesla |
![Go to Top of Page Go to Top of Page](icon_go_up.gif) |
|
Reply #7
Bobakman
![](icon_star_orange.gif) ![](icon_star_orange.gif) ![](icon_star_orange.gif) ![](icon_star_orange.gif)
USA
97 Posts |
Posted - 06/30/2023 : 08:11:52
|
What is the current firmware revision for the 600+ as of today 06/30/2023? I am running 2.45 on mine. Bob |
“If you want to find the secrets of the universe, think in terms of energy, frequency and vibration.” Nikola Tesla |
![Go to Top of Page Go to Top of Page](icon_go_up.gif) |
|
Reply #8
EmfDev
![](icon_star_green.gif) ![](icon_star_green.gif) ![](icon_star_green.gif) ![](icon_star_green.gif) ![](icon_star_green.gif)
2234 Posts |
Posted - 06/30/2023 : 10:13:48
|
Hi Bob, I believe it is 2.46. please email support with your serial number for the udpate. |
![Go to Top of Page Go to Top of Page](icon_go_up.gif) |
|
Reply #9
Bobakman
![](icon_star_orange.gif) ![](icon_star_orange.gif) ![](icon_star_orange.gif) ![](icon_star_orange.gif)
USA
97 Posts |
Posted - 07/02/2023 : 16:56:20
|
quote: Originally posted by EmfDev
Hi Bob, I believe it is 2.46. please email support with your serial number for the udpate.
Thanks, Just sent you an E-Mail. Bob |
“If you want to find the secrets of the universe, think in terms of energy, frequency and vibration.” Nikola Tesla |
![Go to Top of Page Go to Top of Page](icon_go_up.gif) |
|
Reply #10
Bobakman
![](icon_star_orange.gif) ![](icon_star_orange.gif) ![](icon_star_orange.gif) ![](icon_star_orange.gif)
USA
97 Posts |
Posted - 07/03/2023 : 21:05:46
|
quote: Originally posted by EmfDev
Hi Bob, I believe it is 2.46. please email support with your serial number for the udpate.
Thank you Sir firmware on my 600+ has been successfully updated to revision 2.46. Can you tell me what the improvements or fixes were in revision 2.46 from 2.45? Bob |
“If you want to find the secrets of the universe, think in terms of energy, frequency and vibration.” Nikola Tesla |
Edited by - Bobakman on 07/03/2023 21:07:07 |
![Go to Top of Page Go to Top of Page](icon_go_up.gif) |
|
Reply #11
ihab17
![](icon_star_red.gif) ![](icon_star_red.gif) ![](icon_star_red.gif) ![](icon_star_red.gif) ![](icon_star_red.gif)
Italy
218 Posts |
Posted - 07/05/2023 : 02:04:28
|
quote: Originally posted by Bobakman
quote: Originally posted by EmfDev
Hi Bob, I believe it is 2.46. please email support with your serial number for the udpate.
Thank you Sir firmware on my 600+ has been successfully updated to revision 2.46. Can you tell me what the improvements or fixes were in revision 2.46 from 2.45? Bob
I have update my GMC 600+ to this latest version, namely 2.46, and from the short time I have had to test it, the only visible thing jumped to my eyes are the several calibration factors introduced. Previously they were 2, and now if I am not mistaken they are 4 or 5 |
![Go to Top of Page Go to Top of Page](icon_go_up.gif) |
|
Reply #12
Bobakman
![](icon_star_orange.gif) ![](icon_star_orange.gif) ![](icon_star_orange.gif) ![](icon_star_orange.gif)
USA
97 Posts |
Posted - 07/06/2023 : 08:31:50
|
quote: Originally posted by ihab17
quote: Originally posted by Bobakman
quote: Originally posted by EmfDev
Hi Bob, I believe it is 2.46. please email support with your serial number for the udpate.
Thank you Sir firmware on my 600+ has been successfully updated to revision 2.46. Can you tell me what the improvements or fixes were in revision 2.46 from 2.45? Bob
I have update my GMC 600+ to this latest version, namely 2.46, and from the short time I have had to test it, the only visible thing jumped to my eyes are the several calibration factors introduced. Previously they were 2, and now if I am not mistaken they are 4 or 5
Wow you're right I just checked it's actually 6 points. Which raises the question does this negate the original factory calibration which was based on less calibration points? How do we use these 6 calibration points to calibrate the 600+? There should be instructions in the manual for a "basic" calibration using these. Bob
![](uploaded/Bobakman/20230706093118IMG_9573EDT.jpg)
|
“If you want to find the secrets of the universe, think in terms of energy, frequency and vibration.” Nikola Tesla |
![Go to Top of Page Go to Top of Page](icon_go_up.gif) |
|
Reply #13
ullix
![](icon_star_red.gif) ![](icon_star_red.gif) ![](icon_star_red.gif) ![](icon_star_red.gif) ![](icon_star_red.gif)
Germany
1158 Posts |
Posted - 07/07/2023 : 00:13:34
|
Previously you had 3 "calibration" points, which all coded a single(!) value. Now you have 6 "calibration" points which still all code a single value.
And a single value is all that is needed.
But you can do me a favor and download the config memory with GeigerLog 1.5 and post it on Sourceforge.
|
![Go to Top of Page Go to Top of Page](icon_go_up.gif) |
|
Reply #14
Bobakman
![](icon_star_orange.gif) ![](icon_star_orange.gif) ![](icon_star_orange.gif) ![](icon_star_orange.gif)
USA
97 Posts |
Posted - 07/09/2023 : 09:20:30
|
quote: Originally posted by ullix
Previously you had 3 "calibration" points, which all coded a single(!) value. Now you have 6 "calibration" points which still all code a single value.
And a single value is all that is needed.
But you can do me a favor and download the config memory with GeigerLog 1.5 and post it on Sourceforge.
Ullix posted under "Easy Data Uploads" Bob |
“If you want to find the secrets of the universe, think in terms of energy, frequency and vibration.” Nikola Tesla |
![Go to Top of Page Go to Top of Page](icon_go_up.gif) |
|
Reply #15
Bobakman
![](icon_star_orange.gif) ![](icon_star_orange.gif) ![](icon_star_orange.gif) ![](icon_star_orange.gif)
USA
97 Posts |
Posted - 08/02/2023 : 21:05:18
|
OK folks the latest firmware revision for my 600+ is now 2.47. Get them request E-Mails out LOL! Bob |
“If you want to find the secrets of the universe, think in terms of energy, frequency and vibration.” Nikola Tesla |
![Go to Top of Page Go to Top of Page](icon_go_up.gif) |
|
Reply #16
Bobakman
![](icon_star_orange.gif) ![](icon_star_orange.gif) ![](icon_star_orange.gif) ![](icon_star_orange.gif)
USA
97 Posts |
Posted - 02/11/2024 : 20:20:14
|
What is the latest firmware revision for the GMC 600+? Currently I am at 2.47. Bob |
“If you want to find the secrets of the universe, think in terms of energy, frequency and vibration.” Nikola Tesla |
![Go to Top of Page Go to Top of Page](icon_go_up.gif) |
|
Reply #17
ihab17
![](icon_star_red.gif) ![](icon_star_red.gif) ![](icon_star_red.gif) ![](icon_star_red.gif) ![](icon_star_red.gif)
Italy
218 Posts |
Posted - 02/12/2024 : 03:05:11
|
quote: Originally posted by Bobakman
What is the latest firmware revision for the GMC 600+? Currently I am at 2.47. Bob
I am running version 2.51 |
![Go to Top of Page Go to Top of Page](icon_go_up.gif) |
|
Reply #18
ihab17
![](icon_star_red.gif) ![](icon_star_red.gif) ![](icon_star_red.gif) ![](icon_star_red.gif) ![](icon_star_red.gif)
Italy
218 Posts |
Posted - 02/12/2024 : 14:50:54
|
quote: Originally posted by Bobakman
What is the latest firmware revision for the GMC 600+? Currently I am at 2.47. Bob
I have just updated my device to the latest FW version 2.52 |
![Go to Top of Page Go to Top of Page](icon_go_up.gif) |
|
Reply #19
Bobakman
![](icon_star_orange.gif) ![](icon_star_orange.gif) ![](icon_star_orange.gif) ![](icon_star_orange.gif)
USA
97 Posts |
Posted - 02/12/2024 : 18:19:28
|
Thanks ihab17! I'll send an E-mail request for the update. Have you noticed any improvements in performance or know of what was changed/improved? Thanks again, Bob |
“If you want to find the secrets of the universe, think in terms of energy, frequency and vibration.” Nikola Tesla |
![Go to Top of Page Go to Top of Page](icon_go_up.gif) |
|
Reply #20
ihab17
![](icon_star_red.gif) ![](icon_star_red.gif) ![](icon_star_red.gif) ![](icon_star_red.gif) ![](icon_star_red.gif)
Italy
218 Posts |
Posted - 02/12/2024 : 23:34:48
|
quote: Originally posted by Bobakman
Thanks ihab17! I'll send an E-mail request for the update. Have you noticed any improvements in performance or know of what was changed/improved? Thanks again, Bob
Improvements of some crashes and few display bugs YES, improvements in the algorithm and accuracy, not much. Unfortunately QG does not release any change log, so you have to ask them and take their words for granted on what they have changed. |
![Go to Top of Page Go to Top of Page](icon_go_up.gif) |
|
Reply #21
wikilicious
![](icon_star_silver.gif) ![](icon_star_silver.gif)
USA
20 Posts |
Posted - 02/15/2024 : 16:59:45
|
GQ Rev versions don't follow 'semver' semantics...
Seems like there is a deeper issue with rev versions... A serial number wasn't enough... 'DSID' was added... https://www.gqelectronicsllc.com/forum/topic.asp?TOPIC_ID=10394
Wishful thinking: I'd like to have a communication protocol specification mapping to firmware.
|
![Go to Top of Page Go to Top of Page](icon_go_up.gif) |
|
Reply #22
Nisei
![](icon_star_silver.gif) ![](icon_star_silver.gif)
Netherlands
20 Posts |
Posted - 03/04/2024 : 11:36:26
|
Just emailed them for the latest version for my 320 Plus v4 Got a reply that I'm already running the latest which apparently is 4.27 Just a waste of their time. They should indeed make a sticky here that let's you check the latest version for your model. |
John |
![Go to Top of Page Go to Top of Page](icon_go_up.gif) |
|
Reply #23
Bobakman
![](icon_star_orange.gif) ![](icon_star_orange.gif) ![](icon_star_orange.gif) ![](icon_star_orange.gif)
USA
97 Posts |
Posted - 05/02/2024 : 21:33:49
|
Just checking in to see if there is a firmware update newer than the one I have currently on my 600+ revision 2.52? Thanks, Bob |
“If you want to find the secrets of the universe, think in terms of energy, frequency and vibration.” Nikola Tesla |
![Go to Top of Page Go to Top of Page](icon_go_up.gif) |
|
Reply #24
Searinox
![](icon_star_orange.gif) ![](icon_star_orange.gif) ![](icon_star_orange.gif) ![](icon_star_orange.gif)
Romania
51 Posts |
Posted - 05/15/2024 : 23:24:29
|
Hello,
I requested a firmware update via e-mail yesterday to EmfDev. |
![Go to Top of Page Go to Top of Page](icon_go_up.gif) |
|
Reply #25
Bobakman
![](icon_star_orange.gif) ![](icon_star_orange.gif) ![](icon_star_orange.gif) ![](icon_star_orange.gif)
USA
97 Posts |
Posted - 05/16/2024 : 11:31:26
|
Please let me know if the revision you get is later than revision 2.52 because if it is then I’ll need to submit a request as well. Thanks, Bob |
“If you want to find the secrets of the universe, think in terms of energy, frequency and vibration.” Nikola Tesla |
![Go to Top of Page Go to Top of Page](icon_go_up.gif) |
|
Reply #26
Searinox
![](icon_star_orange.gif) ![](icon_star_orange.gif) ![](icon_star_orange.gif) ![](icon_star_orange.gif)
Romania
51 Posts |
Posted - 05/17/2024 : 01:49:31
|
So far I've gotten no response which is odd because all my previous requests got a response the same day. |
![Go to Top of Page Go to Top of Page](icon_go_up.gif) |
|
Reply #27
EmfDev
![](icon_star_green.gif) ![](icon_star_green.gif) ![](icon_star_green.gif) ![](icon_star_green.gif) ![](icon_star_green.gif)
2234 Posts |
|
Reply #28
Searinox
![](icon_star_orange.gif) ![](icon_star_orange.gif) ![](icon_star_orange.gif) ![](icon_star_orange.gif)
Romania
51 Posts |
Posted - 05/31/2024 : 22:55:59
|
Sent directly from email just now. |
![Go to Top of Page Go to Top of Page](icon_go_up.gif) |
|
|
Topic ![Next Topic Next Topic](icon_go_right.gif) |
|