|T O P I C R E V I E W
||Posted - 12/13/2020 : 03:55:57
Hi! I'm working on my university project named "EMF measurements using UAV" and for this project I'm using: -DJI Matrice 600 pro
Baically what I am trying to do is to attach this EMF meter to the drone, and to measure the values #8203;#8203;of the electromagnetic field around some antennas, or a study area (the campus), then make a map of electromagnetic pollution from the data I recive from the GQ EMF-390(a map based on colors) to overlap it into my study area.
I read that the data obtained by the analyzer can be downloaded in excel but i don't know exactly how i can do this mapping based on this data and how to overlay it over the gps coordinates i get from the drone
If there is anyone who can help me with some advice how to make it, I would be very grateful.
|3 L A T E S T R E P L I E S (Newest First)
||Posted - 12/22/2020 : 10:19:19
You can try Excel.
||Posted - 12/22/2020 : 02:47:19
Thx for response.
What software should i use to combine all the data and to make that mapping?
||Posted - 12/14/2020 : 10:38:57
First check if you drone does not have high EMF around it. And also check for the time stamp, when downloading the data to your computer, there is going to be a timestamp, just pair it with the timestamp on your GPS data and combine it with excel. The timestamp from the device is every 3 minutes, but the data is every second so you an just fill the blank timestamps automatically.