Note: You must be registered in order to post a reply. To register, click here. Registration is FREE!
T O P I C R E V I E W
Posted - 08/14/2020 : 18:16:24 I have the GQ EMF-390v2 recently updated to software version 3.03. I was testing out the audio alert and found that the siren function doesn't generate any sound even in the presence of receiving some signals. I was wondering if this is normal (wouldn't think so) or is it possibly a bug? Ron
2 L A T E S T R E P L I E S (Newest First)
Posted - 08/18/2020 : 12:01:32 First I'd like to say thanks for this cool gadget for measuring RF, MF, and EF. I'm sure the design and programming for something like this is complicated.
I've done some more testing. Speaker is ON. I used a Verizon cellular modem wireless hotspot as a test source of RF. I placed the hotspot about 5 feet away and turned it on. For each test, I placed the GQ EMF-390 at the same distance away and in the same position and observed it. I have not tested the alert functions with EF or MF, only RF; and only on the screens indicated. I got the following results. Strange results are marked with an asterisk (*).
all in one screen beep mode flashing light and normal sound alerts ghost mode flashing light and normal sound alerts siren mode * SOLID light and normal sound alerts
rf browser screen beep mode flashing light and normal sound alerts ghost mode * NO light but normal sound alerts siren mode * NO light and NO sound
As you can see, in cases 3, 5, and 6, there were anomalous results. If it matters, I have the RF alarm set to .01 mW/m^2. Hope this helps.
Posted - 08/17/2020 : 09:45:14 Does ghost and beep still works? Have you tried AllInOne Mode with Speaker ON? It should work if other functions work.