|T O P I C R E V I E W
||Posted - 12/15/2017 : 01:20:23
new GMC500 setup to map but not showing? all the connection tests ok, timer set to 2 minute intervals but not showing up. I get that message in the PRO S/W Data Submitted to Server OK.ERR0 I want to fix this and contribute to the world map! Any assistance is greatly appreciated!
Ok looks like there's two of us monitoring here (howzit Lightspeed). I showed up briefly. Now see Lightspeed's count on the green peg. As I zoom in/out the peg toggles from 18 to 2 and back to 18. I think the map is only displaying the highest count submitted at the time.
|2 L A T E S T R E P L I E S (Newest First)
||Posted - 12/16/2017 : 13:38:40
roger. everything working now! we had a single alarm last night then back to normal. interesting to monitor :)
||Posted - 12/15/2017 : 09:42:18
If you have two devices,then you need to assign two different Geiger counter ID on each. Otherwise the system only show the last data received,