| T O P I C R E V I E W |
| konsuella10 |
Posted - 04/24/2019 : 17:12:09
I am new to this meter and I am confused. I been searching this forum for answers on how to understand these readings and I am confused even more. So to get the a safe reading how my meter should be set up? Please and thank you! |
| 8 L A T E S T R E P L I E S (Newest First) |
| konsuella10 |
Posted - 05/03/2019 : 09:49:45
Thanks now I understand better! |
| EmfDev |
Posted - 04/29/2019 : 09:03:46
The RF Spectrum doesn't have alarm for RF. RF, EF, and EMF are different types of radiations. If AllInOne mode is in RF mode, the "High" means that the RF reading is high. To find where the RF source is coming from, it's better to use the RF Browser instead of the RF Spectrum. But if you want also find where EMF and EF are high, then use the AllInOne mode. |
| konsuella10 |
Posted - 04/27/2019 : 18:42:37
Yes I was looking at RF spectrum. I believe I have high radiation in my home, but the GQ meter is very confusing and I am trying to understand how to get the best reading in my house and find where are the highest readings(I have a 4 y old and I am concerned). Yes I was looking at RF spectrum. Now how is this ALL in one mode works: For example I am getting "high" readings like 3.7 mw/m2 or 4mw/m2 in RF mode but like 0.1 v/m I than EME is 01-0.5mg(normal,mixed). In RF Browser mode the peak now -43DBM is 19.55mw/m2..Is it really bad right?? Thanks |
| EmfDev |
Posted - 04/26/2019 : 12:19:55
50 mW/m2 or 5uW/cm2 if I it convertion correctly. In RF browser mode, there are no other bands. Are you looking at the RF Spectrum? |
| konsuella10 |
Posted - 04/25/2019 : 16:44:30
And how about the RF Alarm? The threshold for the RF Alarm (in uW/cm^2) ideal is? Also which Frequency band should I select since there are 6 modes? Also which Start Frequency I need to use and which end frequency of the current band? Thanks |
| EmfDev |
Posted - 04/25/2019 : 14:35:24
Best one for detecting RF is the RF Browser mode. You can simply test your wifi/microwave/cellphone/tablet with this mode. |
| konsuella10 |
Posted - 04/25/2019 : 14:22:25
Thanks I am trying to understand which mode is the best to read RF's in my home? |
| EmfDev |
Posted - 04/25/2019 : 09:54:23
Hi konsuella10? I'm sorry have trouble understanding your question.
If you want to directly speak with our support please call (206)-829-8093. Our company is in Seattle.
And you can also email support@gqelectronicsllc.com. |
