| T O P I C R E V I E W |
| skydiverman |
Posted - 06/10/2019 : 05:42:19
Hi - per the RFC1801, I can do the following;
<GETCPS>>
<GETCPMH>>
<GETCPML>>
or turn on a heartbeat which returns 1 32 bit integer value
question is - how to get the Counts per second differentiated from the high tube and the low tube?
Are these Raw counts or dead time adjusted? if not, I would have to apply the dead time so I would need to know which tube they came from.
is it possible to get the CPS values in real time from both tubes?
thanks
|
| 2 L A T E S T R E P L I E S (Newest First) |
| skydiverman |
Posted - 06/10/2019 : 11:25:50
quote:
Originally posted by EmfDev
The CPS can't be differentiated between the two tube. But you can call the CPSH and CPSL separately.
And yes these raw counts are dead time adjusted IF the dead time is enabled on your device.
If you're making a software you can just call the GETCPMH then GETCPML.
EMFDev, Thanks - that worked exactly.
|
| EmfDev |
Posted - 06/10/2019 : 08:55:41
The CPS can't be differentiated between the two tube. But you can call the CPSH and CPSL separately.
And yes these raw counts are dead time adjusted IF the dead time is enabled on your device.
If you're making a software you can just call the GETCPSH then GETCPSL. |
