| T O P I C    R E V I E W | 
               
              
                | marzio | 
                Posted - 02/02/2018 : 06:18:42  I have a new gmc 600+ firmware 1.14 When CPM exceeds the value of 100 the color of led change from GREEN into RED. in the demo file: from 101 to 200 cpm the led flashes YELLOW, over 200 cpm the led flashes RED. I haven't found anything to set to change this behavior. Is there a setting to introduce the YELLOW color?
  thanks, marzio | 
               
              
                | 4   L A T E S T    R E P L I E S    (Newest First) | 
               
              
                | ZLM | 
                Posted - 02/07/2018 : 22:08:16  The LED only has Green and Red color.  The red color will be on MEDIUM  and HIGH range. | 
               
              
                | ceandre27 | 
                Posted - 02/07/2018 : 14:04:38  quote: Originally posted by marzio
  thanks ceandre27 for your reply, but my gmc 600+ does't flashes in YELLOW color in MEDIUM range, but in RED color.
 
  
  Sorry, I'm wrong!! it has 3 stages of warning, but it do NOT have yellow on MEDIUM.
  It blinks RED without sound alarm , then it reach HIGH, it blink red AND make sound alarm.
  I confused it with another geiger-counter :(
  Sorry again! | 
               
              
                | marzio | 
                Posted - 02/07/2018 : 08:40:49  thanks ceandre27 for your reply, but my gmc 600+ does't flashes in YELLOW color in MEDIUM range, but in RED color. | 
               
              
                | ceandre27 | 
                Posted - 02/07/2018 : 06:11:11  Edit: Sorry, I'm wrong!! It has 3 stages of warning, but it do NOT have yellow on MEDIUM.
  It blinks RED without sound alarm , then it reach HIGH, it blink red AND make sound alarm.
  I confused it with another geiger-counter :(
  Sorry again! | 
               
             
           | 
         
       
       
     |