| T O P I C R E V I E W |
| UnstableIsotope |
Posted - 12/05/2023 : 16:49:56
I find LCD's to be easier to read, especially in bright sunlight, when in reverse mode so I set that option when I found it on the 500+. However, I shut the unit down and when I restarted it, the reversed display option was back to normal. I tried this twice with the same effect.
I am running firmware 2.50 on my GMC-500+ that I just received today.
Looks like a minor bug. |
| 8 L A T E S T R E P L I E S (Newest First) |
| EmfDev |
Posted - 03/07/2025 : 12:43:47
latest version has not been changed. There is a routine LCD refresh every hour but looks like it does not set the reverse display to the current config. |
| GTS |
Posted - 03/04/2025 : 12:20:10
Same problem for 600+ w/2.52. I there a later version where this is fixed? |
| Tony |
Posted - 03/03/2025 : 18:11:59
Hi, I have the same problem, how do I invert the color, after a while it goes back to normal, or if I turn it off it inverts itself to normal |
| UnstableIsotope |
Posted - 12/07/2023 : 15:12:18
Cool. Thanks! |
| EmfDev |
Posted - 12/07/2023 : 14:51:08
Might be fixed on the next firmware update. |
| UnstableIsotope |
Posted - 12/06/2023 : 19:27:25
This is still the case in firmware 2.52 |
| UnstableIsotope |
Posted - 12/05/2023 : 17:36:49
A minor thing, but it should work as expected.
Thanks! |
| EmfDev |
Posted - 12/05/2023 : 17:07:37
Thank you for noticing, I will send it to our devs. |
