GQ Electronics Technical Support Forum Active Users: / Visits Today:
Highest Active Users:
GQ Electronics Technical Support Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 GQ Electronics Forums
 2.GQ Geiger Muller Counter
 How To Update?
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

FBSMatt

Ireland
32 Posts

Posted - 11/26/2019 :  09:22:33  Show Profile  Reply with Quote
Just thought I'd ask so that I know. How do you download and install a firmware update to GQ GMC device?
Thanks.

What Signature?
Reply #1

Geo-Johnny

Austria
161 Posts

Posted - 11/26/2019 :  09:33:05  Show Profile  Reply with Quote
You will need to send an email to GQ Support with the model and serial number, then you will receive the latest firmware.

Geiger Counters: GMC320+V5 & GMC500+
Geiger Tubes: M4011; SI-3BG; SBT-9; LND712; SBM-20
Go to Top of Page
Reply #2

FBSMatt

Ireland
32 Posts

Posted - 11/26/2019 :  10:47:45  Show Profile  Reply with Quote
Thank you. how is it installed to the device?

What Signature?
Go to Top of Page
Reply #3

Geo-Johnny

Austria
161 Posts

Posted - 11/26/2019 :  10:51:03  Show Profile  Reply with Quote
It is an .exe file and is installed via USB with the PC.

Geiger Counters: GMC320+V5 & GMC500+
Geiger Tubes: M4011; SI-3BG; SBT-9; LND712; SBM-20
Go to Top of Page
Reply #4

EmfDev

2131 Posts

Posted - 11/26/2019 :  10:51:30  Show Profile  Reply with Quote
GQ Support will send you a link and you just download the updater and make sure your device is connected then follow the instructions on the updater.
Go to Top of Page
Reply #5

Stargazer 40

USA
382 Posts

Posted - 11/26/2019 :  11:00:00  Show Profile  Reply with Quote
A little more to it.

When you receive a reply email from GQ it will have a link in the email. The link will end with your meter's serial number. You need to plug the meter into the computer you are using to read the email (the meter doesn't need to be turned on but should be showing charging). When you click on the link you'll probably get a warning asking if you're sure you want to run this. Say yes. Then a firmware install box opens. Press the Auto Detect to let the software find the serial port. The text area in the box will show Ready to Write or something close to that. Press the Start button in the box and the software will load from there. The meter will reset when complete. Any custom calibration you have done will need to be re-entered.

Stargazer 40
Go to Top of Page
Reply #6

FBSMatt

Ireland
32 Posts

Posted - 11/26/2019 :  11:16:52  Show Profile  Reply with Quote
Thank You! :)

What Signature?
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GQ Electronics Technical Support Forum © Copyright since 2011 Go To Top Of Page
Generated in 0.07 sec. Snitz's Forums 2000