GQ Electronics Technical Support Forum Active Users: / Visits Today:
Highest Active Users:
GQ Electronics Technical Support Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 GQ Electronics Forums
 3. GQ EMF EF Meter RF Spectrum Power Analyzer
 Question about RF Sensitivity
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Stephan

Germany
8 Posts

Posted - 04/11/2019 :  09:51:41  Show Profile  Reply with Quote
When the RF sensitivity of the EMF-390 is set from Standard to Sensitive, the measured value changes from 89 pw/cm2 to 610 nw/cm2. That's a big difference.
Which setting should be used to obtain a correct measurement?
Thank you very much.
Stephan
Reply #1

EmfDev

2131 Posts

Posted - 04/11/2019 :  11:48:10  Show Profile  Reply with Quote
The sensitive one is open to everything(1MHz-10GHz also possible to pick up noise). Use standard for more accurate data.
Go to Top of Page
Reply #2

Stephan

Germany
8 Posts

Posted - 04/11/2019 :  23:51:01  Show Profile  Reply with Quote
For which frequency range is the Standard setting open?
Thank you very much.
Stephan
Go to Top of Page
Reply #3

EmfDev

2131 Posts

Posted - 04/12/2019 :  14:40:50  Show Profile  Reply with Quote
It's the same 1MHz - 10GHz.
Go to Top of Page
Reply #4

paul

United Kingdom
54 Posts

Posted - 05/10/2019 :  11:55:33  Show Profile  Reply with Quote
Which antennas does the RF Sensitivity function effect ?
I presumed only the 10 GHz.
But it does not seem to effect the RF Browser.

Is it a gain boost ?



Edited by - paul on 05/10/2019 12:54:59
Go to Top of Page
Reply #5

EmfDev

2131 Posts

Posted - 05/10/2019 :  15:02:25  Show Profile  Reply with Quote
The RF sensitivity filters low level noise. Affects AllInOne mode and Vertical mode RF. It's not a gain boost.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GQ Electronics Technical Support Forum © Copyright since 2011 Go To Top Of Page
Generated in 0.06 sec. Snitz's Forums 2000