GQ Electronics Technical Support Forum Active Users: / Visits Today:
Highest Active Users:
GQ Electronics Technical Support Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 GQ Electronics Forums
 2.GQ Geiger Muller Counter
 GMC counter and their USB-To-Serial chips		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

ullix

Germany
1171 Posts
Posted - 01/17/2022 :  09:40:55  Show Profile  Reply with Quote
@Emfdev: I am looking at two counters, a GMC-300E+ and a GMC-500+. Both have the CH340C chip as the USB-To-Serial converter, with VID:PID=0x1a86:0x7523.

As I am trying to improve on the device recognition in GeigerLog: do all GMC counter use this chip and can I thus see the vid:pid as a requirement for a GMC counter detection?
Reply #1

ullix

Germany
1171 Posts
Posted - 01/19/2022 :  23:38:41  Show Profile  Reply with Quote
@EmFDev: ?

By the way: Nice new location! Which boat is your's - the 45 footer?
Edited by - ullix on 01/20/2022 08:52:11
Go to Top of Page
Reply #2

EmfDev

2250 Posts
Posted - 01/20/2022 :  12:57:56  Show Profile  Reply with Quote
Hi ullix, sorry i didnt see your question. Yes we are using the CH340 chip so far with all GMC-300+ and 500+ devices. And just check with our latest one also has the VID:PID=0x1a86:0x7523
Go to Top of Page
Reply #3

ullix

Germany
1171 Posts
Posted - 01/21/2022 :  00:54:19  Show Profile  Reply with Quote
Thanks
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GQ Electronics Technical Support Forum © Copyright since 2011 Go To Top Of Page
Generated in 0.06 sec. Snitz's Forums 2000