GQ Electronics Technical Support Forum Active Users: / Visits Today:
Highest Active Users:
GQ Electronics Technical Support Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 GQ Electronics Forums
 3. GQ EMF EF Meter RF Spectrum Power Analyzer
 Ethernet cable gives 70 v/m2		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

GQ_EMF390

Netherlands
2 Posts
Posted - 12/28/2021 :  02:18:26  Show Profile  Reply with Quote
Hi Guys,

My EMF 390 meter measures 50-70 v/m2 around my Mac Book Pro. This comes from the ethernet cable. Wifi disconnected. Bluetooth as well. When I disconnect the cable, the EF is 10 v/m2 around my computer.

Some how, this doesn't seem right. Because cable should be safer... But the EF is too high.

It's connected via a USB-C converter with the keyboard and power connected to it. When I measure the ethernet cable alone (disconnected) it also is 50-70v/m2.

Any clues on how to bring down the V/m2?
The Router is probably the cause of the high voltage. It's Experia Box v8.

Kind regards!
Rob
Reply #1

EmfDev

2250 Posts
Posted - 01/10/2022 :  11:31:47  Show Profile  Reply with Quote
Hi Rob,
The measured EF is just static EF. It might have come from the router connected through the ethernet cable. It just means that the outlet that the router/modem is connected to is also have that much EF and just pass it through the router. It might cause by some grounding issues. Dont need to worry about static EF as that level is harmless.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GQ Electronics Technical Support Forum © Copyright since 2011 Go To Top Of Page
Generated in 0.05 sec. Snitz's Forums 2000