GQ Electronics Technical Support Forum

Active Users: / Visits Today:
Highest Active Users:

GQ Electronics Technical Support Forum

Username:	Password:
Save Password
Forgot your Password?

All Forums

GQ Electronics Forums

3. GQ EMF EF Meter RF Spectrum Power Analyzer

EMF-390 V/M Question

New Topic

Reply to Topic

Printer Friendly

Author

Topic

josegarcia

Spain
2 Posts

Posted - 12/13/2021 : 13:29:20

Hi there,

I'm proud owner of the EMF-390 which is amazing for the price, good job GQ Electronics

My question is, I've got this meter and I am getting reads of 60 volts per meter when the meter is over the table 1.5 meters away from the screen/computer. When I take it from the downside with my hand it goes to 100-200 volts per meter.

If I put it near metal without any electricity it goes to 500 V/M. It only happens in certain rooms of the house where electronic components like computer, speakers, sound devices are.

In different rooms with almost no electronic devices it happens the same. When I go to the street, the volts per meter goes really low like 5-10.

I wonder if there is a problem with the grounding in my building and the static or electricity is all around the house. In my neighbour's house it happens the same.

EF Factor is 100% and RF Density Gain is 10

Model is V2 and revision 3.69 - Serial N. available if required

thank you so much

josezg

Edited by - josegarcia on 12/13/2021 13:31:31

Reply #1

EmfDev

2250 Posts

Posted - 12/14/2021 : 13:46:53

Hi Jose, I believe I have replied to your email. Most likely those EF are just static EF. AC EF comes from power lines and usually at under high voltage power lines. And yes it is possible that there is a grounding issue on the building that causes high EF readings. Looks like you have the latest version of EMF.

Reply #2

josegarcia

Spain
2 Posts

Posted - 12/14/2021 : 14:38:55

Hi there!

Yes you did reply to my email sir, awesome after-sales service, awesome.

Thanks
Jos�