| Author |
 Topic  |
|
|
Geo-Johnny
Austria
161 Posts |
 Posted - 07/27/2019 : 00:56:00
|
| Would it be possible to set the Geiger Counter World Map to "Last 24 hours" as default? That would be more realistic, because many stations are no longer available or are no longer in operation. I think the option "Any time" should be the last selection point. It would also reduce traffic and the display of the active stations would go much faster. |
Geiger Counters: GMC320+V5 & GMC500+
Geiger Tubes: M4011; SI-3BG; SBT-9; LND712; SBM-20 |
|
| Reply #1
EmfDev
2143 Posts |
Posted - 07/29/2019 : 09:29:27
|
| Hi Geo-Johnny, this has been suggested before and if I remember correctly it was implemented for few weeks however looks like our developer decided to put it back to the "All Time". We will see if we can implement an option to change the default. I will let our developer know about it. |
 |
|
| Reply #2
Geo-Johnny
Austria
161 Posts |
Posted - 07/29/2019 : 11:38:02
|
| That would be nice. Because the current values of the last few hours are of interest, especially if a disaster happens somewhere on the planet. Which normal values were recorded some years ago at some point probably interests the fewest. |
Geiger Counters: GMC320+V5 & GMC500+
Geiger Tubes: M4011; SI-3BG; SBT-9; LND712; SBM-20 |
Edited by - Geo-Johnny on 07/29/2019 11:39:07 |
|
|
| Reply #3
EmfDev
2143 Posts |
Posted - 07/29/2019 : 11:41:46
|
| Right now, you can see the first data to appear are the latest. |
|
|
| Reply #4
Geo-Johnny
Austria
161 Posts |
Posted - 07/29/2019 : 13:08:00
|
| Yes that is true. Nevertheless, the last 24 hours would be optimal as default at the start of the world map. |
Geiger Counters: GMC320+V5 & GMC500+
Geiger Tubes: M4011; SI-3BG; SBT-9; LND712; SBM-20 |
|
|
| Reply #5
EmfDev
2143 Posts |
Posted - 07/29/2019 : 15:13:07
|
| Ok we'll discuss this again with our team. |
|
|
| Reply #6
Geo-Johnny
Austria
161 Posts |
Posted - 08/28/2019 : 10:50:36
|
Okay, the last 24 hours were set as default now - Top!
BUT, now the other times are not working anymore. After a refresh the station icons are deleted and nothing happens anymore. Only the last 24 hours work! I tested it myself with two different browsers. |
Geiger Counters: GMC320+V5 & GMC500+
Geiger Tubes: M4011; SI-3BG; SBT-9; LND712; SBM-20 |
|
|
| Reply #7
Geo-Johnny
Austria
161 Posts |
Posted - 08/29/2019 : 00:36:09
|
Last week - does not work
Last month - does not work
Last year - does not work
Any Time - does not work
Last 24 hours - work, Default
(I'm not sure, but I think it only shows stations of the last 12 hours ?!)
|
Geiger Counters: GMC320+V5 & GMC500+
Geiger Tubes: M4011; SI-3BG; SBT-9; LND712; SBM-20 |
|
|
| Reply #8
EmfDev
2143 Posts |
Posted - 08/29/2019 : 09:03:21
|
| Still checking why it happened. Probably server issue. |
|
|
| Reply #9
Geo-Johnny
Austria
161 Posts |
Posted - 08/30/2019 : 10:44:15
|
| It should be a mistake in programming and not on the server. The 60sec. Refresh routine only works properly in the 24 hour setting. For all other time settings, a refresh only deletes all icons and they will not come back. As written, the last 24 hours settings work, but only with every second refresh cycle. |
Geiger Counters: GMC320+V5 & GMC500+
Geiger Tubes: M4011; SI-3BG; SBT-9; LND712; SBM-20 |
|
|
| Reply #10
EmfDev
2143 Posts |
Posted - 08/30/2019 : 15:14:17
|
| Could be. But the server code hasn't been updated even before this occurred. |
|
|
| Reply #11
Geo-Johnny
Austria
161 Posts |
Posted - 08/30/2019 : 23:40:25
|
| Ok, sorry, I did not know that. |
Geiger Counters: GMC320+V5 & GMC500+
Geiger Tubes: M4011; SI-3BG; SBT-9; LND712; SBM-20 |
|
|
| |
Topic |
|
Last 24 hours as default ?
