GQ Electronics Technical Support Forum


GQ Electronics Technical Support Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 GQ Electronics Forums
 GQ Hot Air Soldering Rework Station
 Normal Question when we inject the ink to the cart
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

v4ink

USA
5 Posts

Posted - 08/10/2017 :  23:54:27  Show Profile  Reply with Quote
1. How many time of the empty cartridge that can be filled?
A: For cartridges ink with print heads (HP ink), the cartridges can be filled more than five times as long as the nozzles on the cartridges are not subject to trauma or nozzle clogging occurs. During the long-term using, because the splash of ink mixed with paper fibers attached to the nozzle, which led to the writing of fuzzy, spread. Using the wet paper napkin wipe the around of nozzle (do not touch the nozzle), and perform a clean print head on the printer until it is clear. According to the results of our actual test, filled with ten times when the print effect changes. But we recommend that users fill 5 times. For [url=https://www.v4ink.com/All-Ink-and-Toner-Product/Hp]hp ink cartridges[/url] without print heads, the fill can be repeated as long as the corpus does not deteriorate.
2. When to fill the ink is the best time
A: The current HP inkjet printer drivers are provided with HP ink instructions. The printer's control panel's ink light starts blinking that is the best time to fill. Because the printer has been detected when the HP ink cartridge is running low, however you can continue to print, then sponge will not deteriorate due to ink, especially HP and LEXMARK ink cartridges they adopt the bubble structure, such as no ink Continue printing will burn the nozzle.
3. Can I print immediately after filling the ink?
A: Most of the [url=https://www.v4ink.com]cartridge ink[/url] contain a sponge, because the sponge absorbs ink at a slower rate, can not immediately achieve a completely uniform absorption, so the cartridge ink should be placed in the printer 30 minutes and then use the printer, that means the ink is completely absorbed , So you can ensure that your print results. If you use the HP printer immediately after filling the HP ink, there will be residual air, so that the ink can not be smooth to the nozzle, the print phenomenon is broken or a color is missing value.
4. Is the ink should be full filled each time When filling?
A:Filling 70% to 80% ink is the most appropriate capacity, because if the full fill may exceed the absorption capacity of the corpus and produce overflow ink, maybe the print will be generated by the ink cartridges ink rejection phenomenon. Affect the print quality, damage the inkjet printer. Black ink can be divided into 2-3 times to fill, color ink can be divided into 3-4 fill.

Printer Toner Cartridge Supplies, Buy Toner Cartridges Online-V4ink
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GQ Electronics Technical Support Forum © Copyright since 2011 Go To Top Of Page
Generated in 0.03 sec. Snitz Forums 2000