Hello,
I only use Ubuntu computers, and I can't test usb data processor for windows. So I download the binary file gqgmc for linux.
But I can't download the complete source directory, is it possible ? I can only get one file at once.
I want to record data in a history file with a bash or a python loop. Can I get Geiger-Muller count each second, or CPM each minute ?
./gqgmc runs and uses the return key, but I don't understand what I get with the ./gqgmc program. I copy/paste what I get at the end of this message.
Is there a bash-command ...gqgmc... that return current cpm (or current Sv/h or totalCount) in stdoutput.
The main loop will be:
While Continue :
wait 10 seconds
echo `date` : `...gqgmc...` >> logFile.txt
and plots become easy !
Many thanks for your help...
F.
# The gqgmc output from my computer (ubuntu 12.04 LTS)
# ./gqgmc /dev/ttyUSB0
USB is opened
date: 030513
time: 171730
get version
GMC-300Re 3.01
get serial number
Paused: to continue, press ENTER..
000300ca05e5f6
get CPM
Paused: to continue, press ENTER..
39
get 5 samples of CPS
Paused: to continue, press ENTER..
0
0
1
1
0
get battery voltage
Paused: to continue, press ENTER..
9.7V
Turning on auto-CPS data
Paused: to continue, press ENTER..
s=0 1
s=1 0
s=2 0
s=3 1
s=4 0
s=5 0
s=6 1
s=7 1
s=8 1
s=9 0
turning off CPS
get history
Paused: to continue, press ENTER..
6 12 b 24 55 aa 2 1b 15 14 14 19 1e 1b 1e 1d
1f 1d 19 21 1b 2b ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
test writing configuration data
Manually set the save data to counts per hour
Paused: to continue, press ENTER..
saveDataType= 2
dataSaveAddress= ce4
set saveDatatype= 2
Paused: to continue, press ENTER..
saveDataType= 2
reset DataSaveAddress
Paused: to continue, press ENTER..
dataSaveAddress= 10
update configuration- this will take about a minute
Paused: to continue, press ENTER..
Paused: to continue, press ENTER..
get configuration
Paused: to continue, press ENTER..
saveDataType= 2
get dataSaveAddress
dataSaveAddress= 10
get history
Paused: to continue, press ENTER..
6 12 b 24 55 aa 2 1b 15 14 14 19 1e 1b 1e 1d
1f 1d 19 21 1b 2b 1c 1e 1a 20 22 1d 55 aa 0 d
3 5 11 19 16 55 aa 2 ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
turn off GQ GMC
Paused: to continue, press ENTER..
$ # And gqgmc ends...
|
gqgmc for ubuntu
Posted - 10/06/2013 : 08:51:07
