GQ Electronics Technical Support Forum Active Users: / Visits Today:
Highest Active Users:
GQ Electronics Technical Support Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 GQ Electronics Forums
 1.Geiger Counter World Map(www.GMCmap.com)
 GMC-320+V5 - "WiFi Module Error" *no* MAC Address		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

jvylasek

USA
5 Posts
Posted - 12/28/2024 :  21:15:28  Show Profile  Reply with Quote
Hello!

I have run into a "WiFi Module Error" issue after resolving my "password with an exclamation point" barrier. Details here in case it's helpful: https://www.gqelectronicsllc.com/forum/topic.asp?TOPIC_ID=10721


I used what I learned on that journey to try using the Data Viewer terminal to send AT+CWMODE=3 as shown here to no avail: https://www.gqelectronicsllc.com/forum/topic.asp?TOPIC_ID=9852

I also tried the AT+CWDHCP=1,1 command as shown here with the same result: https://www.gqelectronicsllc.com/forum/topic.asp?TOPIC_ID=4442

I even did a factory reset and set everything up again from scratch, including the two fixes shown above, with the exact same results.

I just noticed I have no MAC address when I look it up on the device. How do I re-establish that?

I will keep digging, and any advice is appreciated!

Thank you!

Live Long and Prosper
Edited by - jvylasek on 12/28/2024 22:48:59
Reply #1

ZLM

1271 Posts
Posted - 01/03/2025 :  22:39:07  Show Profile  Reply with Quote
Try to remove the Wifi module and reinstall it back. That may solve the contacting problem.

To do this, you need to open the device back cover and you should ve able to see the WiFi module close to the battery.
Go to Top of Page
Reply #2

jvylasek

USA
5 Posts
Posted - 01/06/2025 :  12:25:12  Show Profile  Reply with Quote
Thank you ZLM. I tried re-seating the module to no avail.

I then left the battery out and the ESP-12F wifi module unplugged for 10 minutes then tried again.

Still no MAC address.

Is it possible the module died?

Adding some pictures to share what I am seeing.

Thank you!

Live Long and Prosper
Edited by - jvylasek on 01/06/2025 21:42:25
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GQ Electronics Technical Support Forum © Copyright since 2011 Go To Top Of Page
Generated in 0.08 sec. Snitz's Forums 2000