| Author |
 Topic  |
|
|
mserdag
Argentina
8 Posts |
 Posted - 03/27/2023 : 13:58:42
|
| Hi, i try to connect this arduino 1 by serial port 115200, 8n1, but the emf does not response, i send <POWERON>> just to test, but not work, any idea? |
|
| Reply #1
EmfDev
2260 Posts |
Posted - 03/29/2023 : 10:39:20
|
| Hi mserdag, the port is USB. You need to connect the RX/TX of the arduino to the TX/RX directly to CPU or input pin CH340 of the EMF in order to communicate via uart. |
 |
|
| Reply #2
mserdag
Argentina
8 Posts |
Posted - 03/31/2023 : 08:22:39
|
| Hello, thanks for your answer, arduino one has a usb port with a 2303 adapter similar to the ch340, but it does not communicate with the emf, also try with an arduino due that has a native usb port, but it does not either, just get me to communicate with the computer. |
|
|
| Reply #3
EmfDev
2260 Posts |
Posted - 04/03/2023 : 12:44:59
|
| Our engineer said even ch340 to ch340 also does not work as those are slave devices and only works with the driver. You need to connect the Rx/Tx of the arduino directly to the tx/rx of the emf390 cpu. |
|
|
| |
Topic |
|
comunicate emf-390 with arduino 1
