| T O P I C R E V I E W |
| rddube |
Posted - 04/15/2018 : 05:02:17
Hi,
I love my GQ 5200 station and it's been working fine for over 2 years now. Recently, when I turn on the iron, I get no display...I have to flip the switch back off and on again once or twice before it starts.
Is this just a switch problem that might need cleaning or should I be looking at something on the circuit board?
Many thanks for your help! |
| 3 L A T E S T R E P L I E S (Newest First) |
| Betty Hunt |
Posted - 05/08/2019 : 05:03:24
I had quite amazing experience of using my GQ 5200 station for soldering.
But there's a constant 60hz hum coming out of it, which irritates sometimes! |
| ZLM |
Posted - 05/10/2018 : 12:46:25
sorry for missed your post. But great to know you have fixed the problem. |
| rddube |
Posted - 05/10/2018 : 01:23:22
Never mind, I fixed it myself. Turns out the power switch was defective so I cleaned it with de-oxit and all is back to normal.
Still would be nice do know there is support for this station. I wonder why ZLM doesn't answer?? |
