| T O P I C R E V I E W |
| ZLM |
Posted - 01/15/2013 : 21:59:20
Iron module assembly:
Image Insert:
21.91 KB
Make sure the tip is touching the inner tube when changing the iron heat element or tip. otherwise the tip may crack the heat element.
When tighten the outer nut, it forces the tip down. So, the inner tube must touch the tip end to accept the force.
39.4 KB
Iron checking:
188.08 KB |
| 6 L A T E S T R E P L I E S (Newest First) |
| ZLM |
Posted - 09/21/2020 : 10:00:40
Sorry. We are not able to support this 5 pin twizers. But I think both element should go different power input with same grounding. The temperature sensor only one been used.
|
| rddube |
Posted - 09/20/2020 : 16:30:18
No answer, I guess there is no more support for this item? |
| rddube |
Posted - 08/26/2020 : 17:50:32
Hey ZLM,
I need to change the heating elements in the tweezers and notice that both handles are not wired the same?
Do you have a drawing of how to wire the 2 heating elements in each part of the handle?
Many Thanks,
Raymond |
| Betty Hunt |
Posted - 07/24/2020 : 04:03:15
Great help. |
| ZLM |
Posted - 10/30/2015 : 08:07:24
Yes.
See:
http://www.gqelectronicsllc.com/comersus/store/comersus_viewItem.asp?idProduct=4521 |
| rddube |
Posted - 10/26/2015 : 10:00:01
Hi,
Which heater element is compatible with the tweezer assembly? Is it the same as the soldering iron heater element and can it be purchased on your site?
Thank you |
